Order by Phone: Dean Buckalew (909)795-2352
Order by Fax: (909)658-8880
Order by Fax: (909)658-8880
400 Series Autovalves
With meter mix and dispense systems, the pneumatic
series 400Autovalve is a durable and reliable valve. The A
and B shut off pistons have Teflon seals allowing high flow
with minimal maintenance. In addition, the seals can be
adjusted without disassembly of the valve body.
series 400Autovalve is a durable and reliable valve. The A
and B shut off pistons have Teflon seals allowing high flow
with minimal maintenance. In addition, the seals can be
adjusted without disassembly of the valve body.
450RC Series Snuff Back Autovalves
The pneumatic Series 450RC Re-Circulating Snuff Back
Autovalve is similar to the 400 Series, except for the
shut-off pistons. The 450 ensures good control of dot or
shot volume. After each shot, the dual pistons retract and
"snuff back" material from the end of the mixing nozzle. This
feature helps eliminate "after drool." This valve includes
hard coated and lubricated pistons. It can be used either as
a stationary head or hand-held unit.
Autovalve is similar to the 400 Series, except for the
shut-off pistons. The 450 ensures good control of dot or
shot volume. After each shot, the dual pistons retract and
"snuff back" material from the end of the mixing nozzle. This
feature helps eliminate "after drool." This valve includes
hard coated and lubricated pistons. It can be used either as
a stationary head or hand-held unit.
Components of both the 400 and 450 Series include
| Series 400 Autovalve Assembly |
|
| Series 450 Autovalve Assembly |
Specifications
Weight (aluminum valve and manifold) - 1.6 lbs (0.7 kg)
Weight (stainless steel valve and manifold) - 2.5 lbs (1.1 kg)
Pressure Rating - 3,500 psi (240 bar)
Weight (stainless steel valve and manifold) - 2.5 lbs (1.1 kg)
Pressure Rating - 3,500 psi (240 bar)
 |
 | |  | |  | |  | |  |
Easy to clean - If cross contamination occurs, the manifold can be removed and
cleaned without disassembly of the valve body
Optional Stainless Steel Valve - Recommended for corrosive acrylics or epoxies
Flush Valve Manifold - For cleaning the mixing nozzle with air or solvent. A check
valve is threaded into the side of the manifold.
Lubricated and Hard Coated Pistons - Lubricated with Autogrease for moisture
sensitive adhesives and hard-coated to resist abrasive adhesives
Optional Polytuff, Teflon, Viton, and EP Seals - For varying chemical
fomulations and abrasive conditions
Optional Night Cap & Ratio Check Cap - Available for 1:1 ratio manifolds
cleaned without disassembly of the valve body
Optional Stainless Steel Valve - Recommended for corrosive acrylics or epoxies
Flush Valve Manifold - For cleaning the mixing nozzle with air or solvent. A check
valve is threaded into the side of the manifold.
Lubricated and Hard Coated Pistons - Lubricated with Autogrease for moisture
sensitive adhesives and hard-coated to resist abrasive adhesives
Optional Polytuff, Teflon, Viton, and EP Seals - For varying chemical
fomulations and abrasive conditions
Optional Night Cap & Ratio Check Cap - Available for 1:1 ratio manifolds
|
